FireGen NG AdTran Module Usage

Requirements:
- AdTran firewall
- Firewall logs sent to a syslog server

Downloads:
- AdTran.dll - Version 0.002 - Updated January 18, 2007
- NETFgNgAdTran.dll

Configuring the log profile:
- Start the FireGen NG user interface
- Switch to the Log profiles tab
- Click Add new
- In the Properties section, change the profile name from Profile1 to a name relevant to the specific firewall (i.e. AdTranFw)
- As Firewall type select AdTran
- Select the sample log location. FireGen is using the location of the sample log to look for logs that have to be analyzed for the specified time interval.
- In the Log files detection method section enter the Log naming template. For example, if the log for Feb 28, 2006 is named syslog-2006-02-28.log enter syslog-yyyy-mm-dd.log. FireGen will use this template to build the name of the log that has to be analyzed for the selected time interval. For example, if the Sample log is specified as C:\Logs\syslog-2006-02-28.log, the Log naming is entered as syslog-yyyy-mm-dd.log and the selected time interval for the analysis is March 8, 2006, FireGen will attempt to analyze the C:\Logs\syslog-2006-03-08.log. If the log name does not contain a certain date pattern, FireGen will analyze the log specified as Sample log. For example, if the Sample log is specified as C:\Logs\SyslogCatchAll.txt and the Log naming is specified as SyslogCatchAll.txt, FireGen will always analyze this file, regardless of the selected time interval. If the Log files detection method is selected as Analyze the log specified as sample FireGen will analyze the sample log regardless of the other settings.
- Click on the -> button to save the profile (the profile name should move from the Unsaved section to the Saved one as shown below:

- Switch to On Demand
- Select the reporting interval
- Save the settings by clicking the Apply button
- Press Analyze! to run the analysis